Products

Our Safety Bond range consists of various crimped steel wire rope bonds. They are designed to be used as a secondary safety device in places of entertainment such as museums, event venues and theatres. They are not to be used as a lifting accessory.

Our Safety Bonds come in various lengths and widths and are suitable for most lighting fixtures. Our standard range comes in a black finish. To comply with the relevant safety standards all Safety Bonds must be marked with a working load limit. In the interest of traceability, they must display a serial number, company name and contact details, and these shall be printed on a heat shrink sleeve.

The load capacity differs depending on the bond. Special attention has been given to safety. Therefore, each batch of bonds are given their own test certificate. Depending on the application or local applicable legislation, maximum working loads can be chosen. Bonds are manufactured in-house at our UK factory and samples are regularly tested for quality assurance.

We can supply a full range of bespoke Safety Bonds to suit individual customer specifications. When ordering bespoke bonds note the bond length is from loop to loop excluding the hooks. If a hook is specified with a soft loop, the soft loop will be large enough for the hook to pass through. A thimbled loop will allow the hook to be attached to the thimble loop. Special loop sizes can be made upon request. Our technical sales team will advise the wire diameter and hook specification depending on the working load limit required.